Tapetech 85T Gooseneck Adapter Manuel d'utilisateur télécharger pdf (Page 2)

Operation and Maintenance Guide

1380 Beverage Drive, Suite W

Stone Mountain, GA 30083

1-800-426-6256 | 770-243-2323

Better – Faster – Every time

Updated 04 2012

www.tapetech.com

Operation

The gooseneck is attached to the EasyClean® Pump and is used to fill the automatic

taper. Place the EasyClean® Pump gasket (#700049)on the EasyClean® Pump housing,

over the protruding studs. Then, set the gooseneck over the studs and tighten the hex

nuts firmly to prevent leakage.

Maintenance

Remove the gooseneck from the EasyClean® Pump and clean thoroughly with a brush and

water (or a water hose) to remove all joint compound from the tool. Then, after the tool is clean,

lightly oil with Ames® Bazooka® Oil or any light machine oil.

Gooseneck

1 2

Pas de commentaire

Tapetech 85T Gooseneck Adapter Manuel d'utilisateur Page 2